EZ-ON Label Application Solution

EZ-ON simplifies applying labels to large applications such as tank, drum and vessel marking.

Apply your labels cleanly and professionally every time with the EZ-ON Application Kit. The EZ-ON Kit includes a 32 oz. bottle of EZ-ON Solution and a 4" EZ-ON Squeegee. The solution "wets" the adhesive and delays the bond to give you time to properly adjust the placement of your label. The EZ-ON Squeegee can then push out any bubbles and wrinkles formed during the application.

Poor application significantly reduces label life. Dirt and moisture can compile underneath the label, causing the adhesive to weaken, the corners to peel off and the label to ultimately fall off. Wet application with EZ-ON is a simple resolution to difficult applications such as drum and tank labeling. While EZ-ON supports novice appliers with straightforward labeling projects, it also helps the more experienced with difficult applications requiring more than just a steady hand.

EZ-ON Solution is specially designed to work with DuraLabel pressure-sensitive adhesives without any negative effect or damage. It is non-reactive and wipes away clean once the application is complete.

Eliminate Mistakes and Improve Drum Safety With Properly Applied Labels

Metal 55-gallon drums are commonly used to store hazardous wastes and other harmful or flammable substances, including petroleum distillates and alcohol. Poorly labeled drums increase the likeliness of an accidental release of the hazardous material, as well as exposure to personnel who may come into contact with the drums. EZ-On helps to eliminate this risk.

• Messages may be hard to read because of folds and creases in label – Bubbles in label may reflect light at different angles making it even harder to read.

• Workers may disregard label messages because labels appear unprofessional – importance is conveyed in the care taken to deliver the message. EZ-ON lets you deliver that message with stunning professionalism and care.

EZ-ON SUpports Large-Label Application To Drums and Tanks

Large labels improve facility safety with drum and tank markers that are highly visible and can be seen over long distances. However, their applications presents a greater challenge than typical-sized labels. Lubricating large labels with EZ-ON before when applying them to drums and tanks improves their effectiveness by eliminating unsightly errors like wrinkles and bubbles

Not only does proper application promote longer label life, it also improve the effectiveness of the label's message.

The EZ-ON Squeegee helps apply labels to irregular surfaces, even without using the solution. Use the EZ-ON Squeegee to press the label down with firm strokes from the center to the edge. This forces out any wrinkles and bubbles that may have developed when applying the label.

For more information about the EZ-ON Application Kit or to place an order, call us today at 1-888-326-9244.